Speaker
(Voice Guidance)
LED Indicators
Button
Sensor
Backup Battery
Input Power
Power Consumption
Operation
Temperature
Built-in
Front: Recording LED, GPS LED, B/W/L (Bluetooth/Wi-Fi/LTE)
LED, Front Security LED
Rear: Rear Security LED
Format Button:
Press and hold format button for 5 seconds, and after a beep,
release the button. Then, press again and hold for 5 seconds
and release the button after a beep to format the microSD
card.
Touch Sensor:
Pressing the touch sensor triggers manual recording
depending on the firmware settings.
3-Axis Acceleration Sensor
Built-in Super Capacitor
DC 12V-24V (3 pole DC Plug (Ø3.5 x Ø1.1)) to Wires
(Black: GND / Yellow: B+ / Red: ACC)
y DR970X-1CH
Normal Mode (GPS On/1CH): Avg. 300mA /12V
Parking Mode (GPS Off/1CH): Avg. 230mA /12V
y DR970X-2CH
Normal Mode (GPS On/2CH): Avg. 450mA /12V
Parking Mode (GPS Off/2CH): Avg. 350mA /12V
* Actual power consumption may vary depending on use
conditions and environment.
-20 °C − 70 °C (-4 °F − 158 °F)
DR770X-1CH, 2CH l DR970X-1CH, 2CH 35
Need help?
Do you have a question about the DR770X-1CH and is the answer not in the manual?