Vision 16 Series User Manual page 8

8 Vision 16 Series and 24 Series Engraver User Manual
To avoid electric shock or equipment damage, connect the power to this machine according to the
suggestions in this guide and in compliance with all applicable regulations. Make sure the machine is
properly grounded.
Never operate the equipment with damaged or frayed power cords, loose connections, or exposed
extension cords where the cord could create a tripping hazard.
Be sure to hold the plug, not the cord, when disconnecting the equipment from an electrical socket or
power source.
Keep work area clean. Remove adjustment tools from the machine prior to start-up. Keep workbench
clean. Cluttered work areas can increase the potential for an accident.
Safety Glasses should be worn at all times while machine is running. While machine is running, chips
or other debris may become airborne.
Avoid loose clothing, neckties, gloves, rings, bracelets, or jewelry which may get caught in moving
parts.
If your equipment does not operate properly; in particular, if there are any unusual sounds or smells
coming from it, immediately unplug it and contact a service technician or your local distributor.
Unplug the machine when it is going to be left unused for an extended period of time.
Operators should inspect the machine daily for damage. Under no circumstances should the machine
be operated if there is any doubt about the machine's condition. If there are any questions call the
Vision Engraving Systems technical support team at 602-439-0600.
Keep a safe distance away from machine while its running.
Keep children away from work area at all times. Visitors should be at least 3 feet or more away from
working area.
Do not operate this or any machine while under the influence of drugs or alcohol.
Keep hands away from the spindle at all times when spindle is rotating and/or machine is moving.
Always wait for spindle to stop rotating completely before attempting to insert or change a tool. Do not
try to stop the spindle manually with your hands or other devices. Failure to comply with these
instructions may result in serious personal injury!
Never leave the machine running unattended.
© 2013 Vision Engraving & Routing Systems