Advertisement
SIP Trunk – Port Property continued
[Account] Tab
1. User name:
2. Authentication ID: Enter the
3. Authentication
Password:
[Register] Tab
1. Register Ability:
2. Register Interval:
3. Un-Register Ability:
4. Registrar Server – Name:
5. Registrar Server – IP Address:
6. Registrar Server port number:
6. Registrar Server port number:
Click
[OK]
to apply the changes.
Select
[INS]
on the
Enter the
Username as supplied by I-Net Connect.
(Note this is username without @ipbx.inetplc.org)
For example: Username =
Enter:
12345670
Authentication ID as supplied by I-Net Connect.
(Note this is Authentication ID without @ipbx.inetplc.org)
For example: Authentication ID =
Enter:
12345670
Enter the
password as supplied by I-Net Connect
For example: password =
Enter:
passwordABCD
[V-SIPGW16]
card to bring the SIP trunk ports into service.
12345670
12345670
passwordABCD
Leave enabled
Enter:
120
Leave enabled
Not required
Not required
Leave at 5060
Leave at 5060
4
Advertisement
