EK Quantum Scalar2 Direct Link Side Port Terminal - Acetal User Manual page 8

FC TERMINAL
O-RINGS 14 x 1 mm
FC TERMINAL ASSEBMLY
M4 x 16 DIN7984 SCREW
M4 x 20 DIN7984 SCREW
STEP 3
STEP 3
Place two (2) Terminal O-rings into the terminal slots and position
the replacement terminal assembly on the water block. During this
process, make sure you have aligned the holes.
Secure the terminal with three (3) M4 x 16 DIN7984 and M4 x 20
DIN7984 Screws. The saved terminal badges can be reused, after
securing the replacement terminal.
Make sure that the cold plate and terminal O-rings
stay in the slot before attaching the terminal!
For this step, you will need:
Allen Key 2.5 mm
FC Terminal OR
14 x 1 mm (2 pcs)
- 8 -
M4 x 16 DIN7984 M4 x 20 DIN7984
Screw
Terminal Badge FC Terminal
(2 pcs) (Optional) Assembly
Screw