Operation Menu - Panasonic AJ-D850 Operating Instructions Manual

USER menu
<OPERATION>
No.
115
116
117
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
STOP 0000 NORMAL
RESPNS 0001
EE MODE 0000 NORMAL
SEL 0001
FRZ MODE 0000
SEL 0001 STBOFF
0002 SOF&EJ
– 61 –
This selects the response when the mode is changed to
STOP/STILL while the tape is traveling.
QUICK
0: Priority is given to the output picture.
1: Priority is given to the response.
<Notes>
• At the 1 (QUICK) setting, the picture may not be as clear in
the STOP/STILL mode as it would be at the 0 (NORMAL)
setting.
• CTL may shift by 2 frames.
This selects the output signals in the EE mode.
0: Signals which are delayed by an amount equivalent to the
THRU
time taken for the internal digital signal processing are
output.
1: The signals are output without internal digital signal
processing.
<Notes>
• The NORMAL setting is forcibly selected for the internal
operation when the editing mode is selected, when SDTI is
set as the video input signal selection or when INT SG is
selected for the video or audio signals.
• Use the signals which are output in the EE mode for moni-
toring purposes.
DIS
This selects the output pictures from the playback pictures in
the STANDBY OFF mode and EJECT mode.
0: The video output is muted.
1: The playback picture is frozen at the moment when the
STANDBY OFF mode was established, and output.
2: The playback picture is frozen at the moment when the
STANDBY OFF mode and EJECT mode were established,
and output.
<Notes>
• The status in the freeze mode follows the setting for setup
menu No. 608 (FREEZE SEL).
• In the EJECT mode, freeze pictures are output only when 2
(BLACK) is used as the setup menu No. 105 (AUTO EE
SEL) setting.
Description