Basic Menu - Panasonic AJ-D850 Operating Instructions Manual

Setup menus
USER menu
<BASIC>
No.
004
005
006
007
008
009
010
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
LOCAL 0000
ENA 0001
0002
TAPE 0000
TIMER 0001
SUPER 0000
0001
CHARA 0000
TYPE 0001
REMAIN 0000
SEL 0001
SETUP 0000
NUMBER 0001
MONI 0000
CONTROL 0001
– 58 –
DIS This selects the buttons which can be operated on the front
panel when the REMOTE/LOCAL switch has been set to
ST&EJ
REMOTE.
ENA
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER
buttons can be operated.
12h This selects the 12 or 24 hour display for the CTL counter.
0: 12 hour display
24h
1: 24 hour display
OFF
This selects whether the time code and other super display
which are output to the VIDEO OUT 3 connector is to shown.
ON
0: Not shown.
1: Shown.
WHITE This selects the display type for the super display output to the
VIDEO OUT 3 connector as well as for displays such as the
W/OUT
setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
OFF This selects whether the remaining tape time is shown on the
front panel.
ON
0: Not shown.
1: Shown.
When "T&S&M" is selected as the setup menu item No. 003
(DISPLAY SEL) setting, the remaining tape time is displayed
on the third line of the VIDEO OUT 3 connector superimposed
display in place of the mode display.
<Note>
Even when "1" (ON) is selected, the remaining tape time is not
shown while the unit is calculating the remaining tape time
after ejecting or inserting the cassette.
This selects whether the SETUP-MENU No. is displayed on
OFF
the front panel.
ON
0: The SETUP-MENU No. is not displayed.
1: The SETUP-MENU No. is displayed.
This sets whether the recorder is to be forcibly set to the EE
MANU
mode and the player's playback signals are to be output to the
AUTO
monitor by pressing the recorder's PLAYER button when a
monitor has been connected only to the recorder during deck-
to-deck editing.
0: The recorder is not forcibly set to the EE mode.
1: The recorder is forcibly set to the EE mode, and the
player's playback signals are output.
Description