Vcr Operation; Menu Operation; Tv Operation - Panasonic NV-HS820 Series Operating Instructions Manual

VCR Operation

When you want to operate the VCR,
set the [VCR/TV] switch to [VCR].
VCR-ON/OFF button
Í
To switch the VCR from on to standby mode or vice
versa. In the standby mode, the VCR is still connected
to the mains.
Numeric buttons
To select the programme positions (1–99) of the VCR.
Example: 09:
19:
To enter a ShowView number.
To enter numbers for various settings.
RESET button
RESET
To reset the tape counter (elapsed time) to [0:00.00].
– The tape counter is automatically reset to [0:00.00]
when a video cassette is inserted.
A
Cassette compartment
B
Infra-red Remote Control Receiver window
C
VCR display
Child Lock Function buttons
OK
([OK] and [OFF (i i i i i )] buttons)
This function deactivates all buttons on the VCR and
the remote control. Use this function, when you do not
r
want other people to operate the VCR.
OFF
s
To Activate the Child Lock Function
Hold down the [OK] and the [OFF (i)] buttons
simultaneously until the [! " hold] indication appears in
the VCR display.
– If you press a button while the Child Lock function is
on, the [! " hold] indication appears in the VCR
display to inform you that no operation is possible.
To Cancel the Child Lock Function
Hold down the [OK] and the [OFF (i)] buttons
simultaneously until the [! " hold] indication
disappears.
– If you disconnect the mains lead, the Child Lock
function is automatically cancelled after the power
backup time of approximately 60 minutes has
elapsed.
– If you cannot cancel the Child Lock function, press
the [EXIT] button and perform the operation.
4
VCR
r
9
1 9
Cursor buttons
To select items on the menu.
TV
MENU button
MENU
To display the Main menu.
EXIT button
EXIT
To exit the menu.
OK button
OK
To comfirm or store the selection.
Only Panasonic TVs can be operated with the provided
remote control.
The settings for operating the TV with the remote control
have already been made.
However, some Panasonic TVs cannot be operated using this
remote control.
When you want to operate the TV, set
the [VCR/TV] switch to [TV].
TV-ON/OFF button
Í
To switch the TV on from standby mode or vice versa.
On some TVs it is only possible to switch the TV to
standby mode with this button, but not on. In this case,
try to turn the TV on with one of the following buttons:
Numeric buttons
AV button
Channel button
Numeric buttons
To select the programme positions (1–99) on the TV.
AV button
INPUT SELECT
AV To select the desired AV input on the TV.
Channel button
TRACKING/V-LOCK
To select the desired programme position (TV station)
+
on the TV.
–
TV ASPECT button
TV ASPECT
To switch the screen format between the wide-screen
and other formats.
VOLUME
VOLUME button
+
To adjust the volume of the TV.
–
TV/TEXT button
TV / TEXT
To switch between normal TV mode and teletext mode.
Teletext buttons
If your TV is equipped for
Teletext reception, you can use
these buttons to change the
teletext information displayed on
the screen and select desired
information. For details, refer to
your TV's operating instructions.

Menu Operation

TV Operation

VCR
TV
r
r r r
DATE ON OFF
s s s