User Menu - Panasonic AJ-D850 Operating Instructions Manual

USER menu

<BASIC>
No.
000
001
002
003
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
P-ROLL 0000
.
.
TIME .
0005
.
.
.
0015
CHARA 0000
.
.
.
H-POS
0005
.
.
.
0011
CHARA 0000
.
.
.
V-POS
0018
.
.
.
0022
DISPLAY 0000
SEL 0001
0002
0003
0004
0005
0006
– 57 –
0S This sets the preroll time which can be set from 0 to 15
.
.
.
seconds in 1-second increments.
5S
<Note>
.
.
.
When the unit is set to automatic editing [PREVIEW, AUTO
15S EDIT], the unit will not operate if the preroll time is set to 0
seconds.
0 This sets the position of the characters on the horizontal plane
.
.
.
for the time code and other super displays output to the
5
VIDEO OUT 3 connector.
.
.
.
<Notes>
11 1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3 even if SUPER OFF has been set. How-
ever, when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3 according to
the status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
0 This sets the position of the characters on the vertical plane
.
.
.
for the time code and other super displays output to the
18
VIDEO OUT 3 connector.
.
.
.
<Notes>
22 1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3 even if SUPER OFF has been set. How-
ever, when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT 3 according to
the status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
TIME
This is used to select what is to appear as the time code or
other superimposed display at the VIDEO OUT 3 connector.
T&STA
0: Time only
T&S&M
1: Time and operating status
T&RT
2: Time, operating status and mode
T&YMD
3: Time and recording time
T&MDY
4: Time and recording date (year/month/day)
T&DMY
5: Time and recording date (month/day/year)
6: Time and recording date (day/month/year)
<Notes>
• "DVCPRO MODE," "DV MODE" or "DVCAM MODE" is
displayed as the mode when a DVCPRO, DV or DVCAM
format tape is used, respectively.
• When setting 2 (T&S&M) is used, an error message will
appear when a warning or error has occurred.
• The recording time and recording date are displayed only
when a DV or DVCAM format tape is played back. The
operating status is displayed when a DVCPRO format tape
is played back.
Description