Panasonic AJ-D850 Operating Instructions Manual page 7

<Front Panel Top Section>
e INPUT SELECT display
The characters corresponding to the selected input signal light. When, with the exception
of analog signals, the selected input signals are not available, the display flashes to alert
the user.
<Video>
Y PB PR:
CMPST:
SDTI (V&A): Compressed data, serial and digital video and audio signals (option)
SDI:
When BB has been selected as the setup menu No. 601 (INT BB SIG) setting, the entire
display area will light up.
<Audio>
ANALOG:
AES/EBU:
USER SET: Selection of audio signal to be recorded
SDI:
When ON has been selected as the setup menu No. 722 (INT SG) setting, the entire
display area will light up.
r Cassette insertion slot
The M cassette, L cassette and consumer cassette (S cassette) with adaptor are inserted
into this slot.
Consumer cassettes can be played back only.
t EJECT button
When this is pressed, the tape is unloaded and several seconds later the cassette is
automatically ejected. When the counter display indicates "CTL", the display is reset.
The lamp lights when the eject command is received.
y Channel condition lamps
One of these lamps lights in accordance with the error rate status. (Green amber red)
Green: This lights when the error rates for the video and audio playback signals are both
Amber: This lights when the error rate for the video or audio playback signals has
Red:
u AUTO OFF lamp
This lights when trouble has arisen in the deck's operation.
Analog component video signal
Analog composite video signal
Serial digital video signal (EBU Tech. 3267-E) (option)
Analog audio signal
Digital audio signal
Serial digital audio signal (EBU Tech. 3267-E) (option)
acceptable.
deteriorated.
The playback picture will remain normal even when this lamp lights.
This lights when the video or audio signals are subject to rectification or
interpolation.
– 7 –