Video Menu - Panasonic AJ-D850 Operating Instructions Manual

USER menu
<VIDEO>
No.
614
616
617
650
652
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
VOUT 0000
SETUP 0001
CMPNT 0000
SETUP 0001
INTER- 0000
POLATE 0001
SER IN 0000
MODE 0001
SER OUT1 0000
SEL 0001
0002
– 71 –
THRU
This selects the composite output signal.
0: The signal is output without setup.
ADD
1: The signal is output with 7.5% setup.
<Note>
When setting this menu item, bear the setup menu No. 616
(CMPNT SETUP) setting in mind.
THRU
When composite, component and serial (digital) signals are to
be output:
CUT
0: They are output in their original form.
1: They are output without the 7.5% setup signal.
OFF
Although vertical interpolation is performed automatically
during slow-motion playback and the vertical motion of the
AUTO
playback picture is reduced, this menu item enables the
interpolation operation to be forcibly turned off.
0: The interpolation operation is forcibly turned off.
1: The interpolation operation is automatically turned on
during slow-motion playback.
MANU This selects the serial input mode.
0: The setting reflects what is selected by the INPUT SELECT
AUTO
switch on the front panel.
1: SDTI or SDI signals are automatically selected in accordance
with the format of the serial input signals.
The INPUT SELECT display on the front panel is switched
automatically to match the input signals.
<Note>
This menu item can be set only when the AJ-YAC850P SDTI/
SDI interface board has been installed.
SDI This selects the signals which are to be output to serial output 1.
0: SDI signals are output.
SDTI
1: SDTI signals are output.
AUTO
2: SDTI signals are output during DVCPRO playback or which
in the EE mode; SDI signals are output during DV or
DVCAM playback.
<Note>
This menu item can be set only when the AJ-YAC850P SDTI/
SDI interface board has been installed.
Description