Panasonic AJ-D850 Operating Instructions Manual page 66

Setup menus
USER menu
<EDIT>
No.
322
323
324
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
AUD MEM 0000
MODE 0001
0002 AMU_VO
0003
0004 INT_VO
AUD MEM 0000
CH 0001
POSTROLL 0000
TM 0001
0002
0003
0004
0005
– 66 –
OFF This selects whether the voice-over or audio cross channel
editing which is to be performed using the AJ-YA752 audio
AMU_X
memory unit or internal audio memory.
0: Neither voice-over nor audio cross channel editing is
INT_X
performed
1: Audio cross channel editing is performed using the AJ-
YA752 audio memory unit.
2: Voice-over editing is performed using the AJ-YA752 audio
memory unit.
3: Audio cross channel editing is performed using the internal
audio memory.
4: Voice-over editing is performed using the internal audio
memory.
<Notes>
• The RS-232C interface will not function with the 1 (AMU_X)
or 2 (AMU_VO) setting.
• Refer to the instruction manual of the AJ-YA752 audio
memory unit for details on how to use each mode using this
unit.
CH1 This sets the channel for the voice-over or audio cross
channel editing which is performed using the AJ-YA752 audio
CH2
memory unit or internal audio memory.
0: The signals are recorded onto CH1.
1: The signals are recorded onto CH2.
<Note>
This setting has no effect when AMU_VO has been selected
as the setup menu No. 322 (AUD MEM MODE) setting.
0s This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-second units.
1s
2s
3s
4s
5s
Description