System Menu; Basic Menu - Panasonic AJ-D650 Operating Instructions Manual

SYSTEM menu

<SYSTEM>
No.
00
01
02
00
10
The underline on the setting item denotes the initial setting.
USER menu
<BASIC>
No.
000
001
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display
display
SYS SC 0000
COAR. 0001
0002
0003
SYS SC 0000
FINE
0127
0255
SYS H 0000
0112
0224
ENCODER 0000
SEL 0001
AV PHASE
0000
0128
0255
Item
Setting
Superimposed Superimposed
No.
display display
P-ROLL 0 0 0 0
TIME
0005
0015
CHARA 0000
H-POS
0005
0012
– 2 7 –
System phase rough adjustment: 90° units
0
90
<Note>
180
When shipped from the factory, the setting values do not
270
change even if setting operations are performed.
System phase fine adjustment: Total variable range:±90° or
- 1 2 7
more
-:
advanced
0
+: delayed
127
System phase adjustment: ±2µ sec (SC cycle phase)
- 1 1 2
-: Advanced
+: Delayed
0
<Note>
When shipped from the factory, the setting values do not
112
change even if setting operations are performed.
OFF This selects whether the ENCODER connector functions.
0: Does not functions.
ON
1: Functions.
This adjusts the audio output phase with respect to the video
- 1 2 8
output: 20.8 µ s steps
-: The audio output phase is advanced with respect to the
0
video output.
+: The audio output phase is delayed with respect to the
127
video output.
This sets the preroll time which can be set from 0 to 15 seconds
0S
in 1 -second increments.
<Note>
5S
In the case of AJ-D640, the unit will not operate if the preroll
time is set to 0 seconds when the unit is set to automatic
15S
editing (PREVIEW, AUTO EDIT COMMAND) from an
external controller.
This sets the position of the characters on the horizontal
0
plane for the time code and other super displays output to the
VIDEO OUT 3 connector.
5
<Note>
1. When setting this item, the DISPLAY SEL status is output to
12
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
Description
Description