User Menu - Panasonic AJ-HD150 Operating Instructions Manual

Setup menus

USER menu

<BASIC>
No.
000
001
002
003
004
005
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
P-ROLL 0000
TIME :
0005
:
0015
LOCAL 0000
ENA 0001
0002
TAPE 0000
TIMER 0001
REMAIN 0000
SEL 0001
SYNCHRO- 0000
NIZE 0001
SUPER 0000
0001
– 53 –
0S This sets the preroll time which can be set from 0 to 15
: seconds in 1-second increments.
5S <Note>
: When the unit is set to automatic editing [PREVIEW, AUTO
EDIT], the unit will not operate if the preroll time is set to 0
15S
seconds.
This selects the buttons which can be operated on the front panel
DIS
ST&EJ when the REMOTE/LOCAL switch has been set to REMOTE.
ENA 0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER
buttons can be operated.
This selects the 12 or 24 hour display for the CTL counter.
±12h
24h 0: 12 hour display
1: 24 hour display
OFF This selects whether the REMAIN (remaining tape time)
ON display is to be superimposed onto the HD SDI OUT3, SD SDI
OUT3 and VIDEO OUT3 connector signals.
0: Display is not superimposed.
1: Display is superimposed.
<Note>
1. Even when "1: ON" is selected, the remaining tape time will
not be displayed while this is being calculated after a tape
has been ejected or inserted.
2. The remaining tape time is not displayed when TIME has
been selected as the setup menu item No.006 (DISPLAY
SEL) setting.
This sets whether the phase is to be synchronized between
OFF
ON two decks.
0: The phase is not synchronized. The edit points will be off
by several frames but editing can be entered more quickly.
1: The phase is synchronized.
performed.
This selects whether the time code and other displays are to
OFF
ON be superimposed onto the HD SDI OUT3, SD SDI OUT3 and
VIDEO OUT3 connector signals.
0: Displays are not superimposed.
1: Displays are superimposed.
Description
Error-free editing can be