YASKAWA 1000 Series Installation Manual page 20

5 Installation Procedure
6.
Route the option wiring.
Depending on the unit model, some units may require routing the wiring through the
side of the front cover to the outside. In these cases, cut out the perforated
openings on the left side of the unit front cover as shown in
sharp edges to damage wiring.
Route the wiring inside the enclosure as shown in
require routing through the front cover.
Refer to the Peripheral Devices & Options section of the unit Instruction Manual for
more information.
Figure 9
20
A
Figure 9 Wire Routing Examples
YASKAWA ELECTRIC TOBP C730600 40E 1000-Series Option AO-A3 Installation Manual
Figure 9-A and leave no
Figure 9-B for units that do not
B