Nations N32G43 Series User Manual page 296

Output comparison mode:
Bit field Name
15 OC4CEN
14:12 OC4MD[2:0]
11 OC4PEN
10 OC4FEN
9:8 CC4SEL[1:0]
7 OC3CEN
6:4 OC3MD[2:0]
3 OC3PEN
2 OC3FEN
1:0 CC3SEL[1:0]
Input capture mode:
Bit field Name
15:12 IC4F[3:0]
11:10 IC4PSC[1:0]
Description
Output compare 4 clear enable
Output compare 4 mode
Output compare 4 preload enable
Output compare 4 fast enable
Capture/Compare 4 selection
These bits are used to select the input/output and input mapping of the channel
00: CC4 channel is configured as output
01: CC4 channel is configured as input, IC4 is mapped on TI4
10: CC4 channel is configured as input, IC4 is mapped on TI3
11: CC4 channel is configured as input, IC4 is mapped on TRC. This mode is only active when
the internal trigger input is selected by TIMx_SMCTRL.TSEL.
Note: CC4SEL is writable only when the channel is off (TIMx_CCEN.CC4EN = 0).
Output compare 3 clear enable
Output compare 3 mode
Output compare 3 preload enable
Output compare 3 fast enable
Capture/Compare 3 selection
These bits are used to select the input/output and input mapping of the channel
00: CC3 channel is configured as output
01: CC3 channel is configured as input, IC3 is mapped to TI3
10: CC3 channel is configured as input, IC3 is mapped on TI4
11: CC3 channel is configured as input, IC3 is mapped to TRC. This mode is only active when
the internal trigger input is selected by TIMx_SMCTRL.TSEL.
Note: CC3SEL is writable only when the channel is off (TIMx_CCEN.CC3EN = 0).
Description
Input Capture 4 filter
Input Capture 4 Prescaler
273 / 631
Nations Technologies Inc.
Tel：+86-755-86309900
Email：info@nationstech.com
Address: Nations Tower, #109 Baoshen Road, Hi-tech Park North.
Nanshan District, Shenzhen, 518057, P.R.China