Technical Data; Maintenance And Cleaning - D+H GVL 8408-M-UL Original Instructions Manual

Technical Data

Type
Rated voltage
Rated power
Stand-by operating
Protection class
Temperature range
Ingress protection
Class of rating
Output voltage
Safe output: *
Running current of drives
Rated current of drives
Housing
colour of housing
Housing dimensions
* Please observe:
The output current of the groups 1 ... 5 amounts max. 4 A.
The total output current of the control panel, is limited up to 8 A.
Window drives (Accessories)
Mounting of drive:
Because of varied possiblilties for choosing drives,
Please take mounting informations from relevant
instructions for use of the respective drive.
Moving direction of drives:
Change poles of wires of the drive supply
(„Mot.a" and „Mot.b"), when moving direction is wrong.
Disposal
Electrical devices, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose electrical devices into household waste!
10/12
GVL 8408-M-UL
GVL 8408-M-UL
115 V AC ± 10%, 60 Hz
388 VA
ca. 2.5 W
I
-5 ... +40 °C (23...104°F)
IP 30
short-time duty, 20%
24 V DC / residual ripple
6.4 A
8 A
plastic
white
12.1'' x 12.1'' x 3.9''
310 x 310 x 100 mm
English
< 10%

Maintenance and cleaning

To avoid accidents always disconnect the ventilation
control from the power supply before cleaning or
performing any maintenance.Inspection and
maintenance has to be carried out according to
D+H maintenance notes. Only original D+H spare
parts may be used. Repair is to be carried out
exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.
99.828.04 1.0/06/19