Table Of Contents; Technical Data, Maintenance, Scope Of Delivery - D+H RZN 4503-T Instructions For Use Manual

Content
Guarantee ..................................................................................................................................1
Technical Data, Maintenance, Scope of delivery
Introduction................................................................................................................................3
Overview operating elements.....................................................................................................4
Operating...............................................................................................................................5-7
Extended functions...................................................................................................
LEDs und functions
Cable und Emergency Supply...................................................................................................10
Starting.....................................................................................................................................11
Examination.............................................................................................................................12
Technical Data
Rated voltage : 230 VAC, 50 Hz
Rated capacity : 100 VA
Capacity con sump -
tion standby : < 5 W
Interfering
emission : EN 61000-6-3 (08.02)
Res. to jamming : EN 61000-6-2 (08.02)
Protective
category : I
Fire resistance : -5 to +40 °C
Protective system : IP30
Class of rating
- Monitoring : Continuous duty
- Emergency
state/ ventilation : Short-time duty
Output voltage : 24 VDC / res. ripple <5%
Safe output
- rated current : 3 A (30% power-on time)
Dimensions : 156x83x232 (W x D x H)
maximum no. of fire detectors: 14 pcs.
maximum no. of smoke vent buttons: 8 pcs.
D+H Highspeed (HS) drives will be
Scope of delivery
1 x pre-assembled control panel
1 x pre-assembled
1 x breaking glas
3 x hanger bolt
6 x hexagonal nut M5 DIN 6923-8
1 x mounting tool
1 x sheet "smoke vent" different languages
2 x key
2/12
99.823.83
.....................................................................................................................9
(+10%, -15%)
housing
Rev.: 1.1
..........................................................................2
Maintenance
Once a year by a specialist company
authorised by the equipment manufacturer.
Renew test badge. Update logbook.
The respective current D+H maintenance
instructions should be followed.
A D+H authorised company has been specially
trained by D+H for carrying out this
maintenance competently and will be
automatically provided with the latest
maintenance instructions.
Following tests must be carried out during
maintenance:
- External examination and inspection of
system components
- Measuring of insulation resistances
- Checking of all relevant power supply
units.
- Functional testing of connected system
components.
- Logging of competent execution of
maintenance and identification in
accordance with directions.
Information
An overdue maintenance of the system will be
indicated by the control panel after about
14 to 16 months. The yellow diode in the
control panel and in the smoke vent button
RT 43-H will start flashing.
A malfunction in the smoke vent system will be
continually indicated by the extinguished
green control diodes in the smoke vent
buttons.
After the maintenance time is expired (ca. 14 to
16 months), the ventilation function OPEN can
be interrupted depending on the presetting of
the service timer. Reset can be carried out by a
specialist company only who has been
authorized by the appliance manufacturer.
..................8