Keysight Technologies U1733C Quick Start Manual page 2

Contacting Keysight
www.keysight.com/find/assist
(worldwide contact information for
repair and service)
Safety and EMC Information
This meter is safety-certified in
compliance with the following
safety and EMC requirements:
– IEC61010-1:2001/
EN61010-1:2001
(Second Edition)
– IEC 61326-1:2005/
EN 61326-1:2006
– Canada: ICES/NMB-001:
Issue 4, June 2006
– Australia/New Zealand:
AS/NZS CISPR11:2004
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
For further safety information details, refer to the
Keysight U1731C/U1732C/U1733C Handheld LCR Meter User's Guide.
2 Keysight U1731C/U1732C/U1733C Quick Start Guide
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
Safety symbols
Earth (ground) terminal
Equipment protected
throughout by double
insulation or reinforced
insulation
Caution, risk of electric
shock
Caution, risk of danger
(refer to this manual for
specific Warning or Caution
information)