Page 1
Mobile Computer MC93 Status: March 2021 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. BARTEC GmbH Max-Eyth-Straße 16 Fon: +49 7931 597-0 Support: em-support@bartec.com...
Mobile Computer & Touch Computer Table of content FAQ: Touch Modes 1. Information of this FAQ ........................2 1.1 Reference documents ...................... 2 2. About Touch Mode ..........................3 3. Note about setup procedure of Touch Mode ..................3 4. Setup of Touch Mode ...........................
Important advice and information for the effective, efficient and environmentally sound use of the product. Reference documents All documents are available online from the following websites: ‒ BARTEC: www.bartec.com or https://automation.bartec.de/mobileE.htm Document BARTEC Explanation Quick Start Guide of: It contains: Touch Computer TC77...
Mobile Computer & Touch Computer FAQ: Touch Modes About Touch Mode The touch mode of the devices is in default set to "finger only" to be able to operate the touch screen optimally with the fingers. Note about setup procedure of Touch Mode The following description is written for Android 10 on Touch Computer TC77 -NI and Mobile Computer MC93...
The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger. A glove can be made of medical latex, leather, cotton, or wool. For optimal performance use a BARTEC certified and specified stylus. 1. Go to “Settings”...
Page 7
Mobile Computer & Touch Computer FAQ: Touch Modes 5. Select the touch mode for your application. Glove and Finger (Screen Protector off) to use a finger or a gloved finger on the screen without a screen protector. Stylus and Finger (Screen Protector off) to use a finger or a stylus on the screen without a screen protector.