Page 1
Mobile Computer MC 92NO Quick Start Guide...
Page 3
Status: January 2022 Proviso: Subject to technical changes. Changes, mistakes and printing errors do not substantiate any claim to damages. Content Pages English 1-36 BARTEC GmbH Max-Eyth-Straße 16 Fon: +49 7931 597-0 Support: em-support@bartec.com 97980 Bad Mergentheim Fax: +49 7931 597-119 Download: http://automation.bartec.de...
MC 92N0 - Mobile Computer Table of content Type 17-A1A*-****/******** Basic safety information ........................1 Information on this Quick Start Guide ................1 Languages ........................2 Changes in the document ....................2 Registered trademarks ..................... 2 Handling the product ......................2 Intended use ........................
Page 6
MC 92N0 - Mobile Computer Table of content Type 17-A1A*-****/******** Commissioning ........................... 22 Requirements in potentially explosive atmosphere ............22 First steps ........................24 Operation ............................. 25 Final inspection....................... 25 Handling ......................... 25 Handling accessories ..................... 26 Insert/change battery ...................... 26 Change keypad ......................
The BARTEC company reserves the right to carry out technical changes at any time. In no event will BARTEC company be responsible or liable for indirect or consequential damages resulting from the use or application of this Quick Start Guide.
BARTEC or stated on placing an order. Changes in the document BARTEC reserves the right to change the content of this document without notification. No warranty is assumed for the correctness of the information. In cases of doubt, the German safety instructions apply because it is not possible to rule out errors of translation or printing.
MC 92N0 - Mobile Computer Basic safety information Type 17-A1A*-****/******** Intended use Exclusive purpose The Mobile Computer is a handheld piece of electrical equipment. It serves the purpose of the mobile recording, processing and/or radio transmission of data within potentially explosive atmospheres.
Repairs to explosion-protected devices may only be performed by authorised personnel with original spare parts and according to the state of the art. Therfore all repairs to the Mobile Computer have to conducted by BARTEC. Contact information and instructions for repair requests and processing can be found at: https://www.bartec.de/en/products/automation-enterprise-mobility/...
The information contained herein refers to the explosion-protected version of the Mobile Computer MC 92N0 -IS. This Quick Start Guide contains all important information on the subject of explosion protection. Further product information on handling and commissioning can be found on the BARTEC support page: https://automation.bartec.de/mobileE.htm Subject to technical changes. 5/36...
Co-applicable documents All documents are available online from the following websites: BARTEC: www.bartec.com or http://automation.bartec.de ZEBRA: www.zebra.com In the event of an overlaps with Zebra, the instructions of BARTEC apply. Document BARTEC Explanation User manual This user manual describes the use of the...
MC 92N0 - Mobile Computer Basic safety information Type 17-A1A*-****/******** 1.11 Configuration The devices are only supplied with preinstalled operating system. Customer software or further applications are not contained in the delivery. This Quick Start Guide refers to the following configurations: Configuration Version Processor...
The MC 92N0 -IS is a tough Mobile Computer with 3.7" color display, which has been designed for use in the industrial environments and especially developed by BARTEC in close cooperation with ZEBRA for use in potentially explosive atmospheres. Purpose of use The Mobile Computer MC 92N0 -IS are handheld electrical devices.
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Technical data Explosion protection ATEX Zone 1 Type 17-A1A3-****/******** MC 92N0 Labelling II 2G Ex q [ib] IIC T4 Gb Test certificate PTB 13 ATEX 2019 X Standards See chapter: EU Declaration of Conformity IECEx Zone 1 Type 17-A1A3-****/********...
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Features Performance features Dual-Core 1 GHz OMAP 4430-Prozessor Operating system Windows WEH 6.5.3 Windows CE 7.0 Android 4.4.4 Memory 4 GB RAM; 32 GB Flash Extension slot SD card slot with SDHC support (up to 32 GB) Interfaces...
Page 18
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Keypad versions 28 Keypad (Numeric keys can be used direct, Alpha keys and other key functions can be used via function keys) 43 Keypad (Numeric- and Function keys can be used direct, Alpha keys and other key functions can be used via function keys) ...
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** User environment Operating temperature -20 °C to +40 °C ( -4 °F to +104 °F) Charging temperature 0 °C to +40 °C (+32 °F to +104 °F) Storage temperature -40 °C to +70 °C (-40 °F to +158 °F) (without battery) Relative humidity...
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Reading range Barcode capture Reading range 1D-Barcodes minimum maximum SE965-SR 2.5 cm 130 cm 0.98 inch 51.18 inch 1D Standard Range Scan Engine SE1524-ER 5 cm 1370 cm 1.97 inch 539.37 inch 1D Extended Range Scan Engine 1D-/2D Barcodes SE4500-SR...
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Application development No functional changes were made to the device Software because of the explosion protection. All tools and applications available from Zebra for the MC9200 are compatible with the MC92N0ex version. E.g.
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Voice and data transmission Wireless LAN WLAN radio module Radio standard Android: IEEE 802.11 a/b/g/n/d/h/i/k/r WinCE/WEH: IEEE 802.11 a/b/g/n/d/h/i Note: IEEE802.11 a is not available in Thailand Output power 100 mW (USA and International) Data rate IEEE802.11a: up to 54 Mbit/sec.
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Voice and data transmission Wireless PAN Bluetooth Windows operating system: Microsoft stack: (preinstalled by default) Bluetooth Version 2.1 with Stonestreet stack (can be optionally activated) Bluetooth 4.0 Plus BLE or WBA Android operating system: Bluetooth version 4.0 with low energy consumption Maximum Output Power...
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Battery The life of the battery will depend on different use factors and the device settings, e.g.: Use and setting of WLAN/Bluetooth Background lighting/screensaver The settings in power management ...
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Product labelling Mobile Computer CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE EXPOSURE. ATTENTION - LUMIÈRE LASER DE CLASSE 3R, EN CAS Laser warning D’OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU. VORSICHT - LASERLICHT KLASSE 3R, WENN ABDECKUNG GEÖFFNET.
MC 92N0 - Mobile Computer Technical data Type 17-A1A*-****/******** Battery Battery label Type 17-A1Z0-0001 Battery label Type 17-A1Z0-0023 Laser Labels In compliance with IEC 60825 and EN 60825, Clause 5 the following information is provided: DEUTSCH KLASSE 1 KLASSE 1 LASER PRODUKT KLASSE 2 LASERLICHT NICHT IN DEN LASERSTRAHL SEHEN...
Replace the battery if the operating time has shortened considerably. The standard warranty period for all BARTEC batteries is six months, whereby it is irrelevant whether the battery was acquired separately or was contained in the scope of the delivery of the Mobile Computer.
MC 92N0 - Mobile Computer Commissioning Type 17-A1A*-****/******** Commissioning DANGER Avoid electrostatic charging in potentially explosive atmosphere. Danger to life in explosive atmosphere! Do not dry wipe or clean the devices. Wear suitable clothing and shoes. Do not use rubber gloves or similar. ...
Page 29
Accessories Only install or replace accessories outside the potentially explosive atmosphere. User accessories exclusively which have been tested or certified by BARTEC for this purpose. The end user can replace the keypad, leather holster and handstrap himself.
MC 92N0 - Mobile Computer Commissioning Type 17-A1A*-****/******** First steps Unpack the Mobile Computer. Insert and charge the battery into the Mobile Computer. charge the battery and then insert it into the Mobile Computer. Use one of the following accessories to charge: Charging process Battery Description...
MC 92N0 - Mobile Computer Operation Type 17-A1A*-****/******** Operation The operator using an electric system in an potentially explosive environment must keep the accompanying operation equipment in a good condition, operate and monitor it correctly and conduct the requisite services and repairs. Before commissioning the devices, it must be checked that all components and documents are available.
Type 17-A1A*-****/******** Handling accessories DANGER Non certified accessories endanger explosion protection. Danger to life exists in potentially explosive atmospheres! Only use original accessories from BARTEC. Only permitted outside the potentially explosive atmosphere: Insert/charge battery. Attach/remove accessories such as keypad, leather holster and handstrap.
Page 33
2. The battery (type 17-A1Z0-0001 and 17-A1Z0-0023) may be inserted/changed in hazardous areas. 3. Use only batteries which have been tested or certified by BARTEC for this purpose. 4. To remove the battery, first unlock the side battery lock. Then unlock the battery lock.
DANGER Non-certified accessories endanger explosion protection. There is a risk of fatal injury in an explosive atmosphere! It must be ensured that only original keypads from BARTEC with blue overlay are used in safety-oriented operation. The use of imitation keypads from other manufacturers will render the type of ...
Page 35
MC 92N0 - Mobile Computer Operation Type 17-A1A*-****/******** Insert both of the keyboard’s guide pins into the guide grooves on the mobile computer. Snap on the keypad in the direction of the arrow and push it upwards until the boreholes for the screws are over the threaded sleeves. Subject to technical changes.
Do not apply more than 0.5 NM or 4 in-lbs of torque when tightening the keypad screws. Leather holster BARTEC offers holsters to protect the MC 92N0 -IS. DANGER Non-certified accessories endanger explosion protection. There is a risk of fatal injury in an explosive atmosphere! Use only the original leather holsters.
MC 92N0 - Mobile Computer Operation Type 17-A1A*-****/******** Scanning Ensure that an application is open on the device and a text field is in focus (text cursor in text field). Point the top of the device at a barcode. Press and hold the Scan button or trigger. The red laser aiming pattern turns on to assist in aiming.
MC 92N0 - Mobile Computer Service, Inspection, Repair Type 17-A1A*-****/******** Service, Inspection, Repair Commissioning and service of Mobile Computers may be conducted exclusively by trained and qualified staff! The staff is familiar with the installation, assembly, commissioning and operation of the Mobile Computers, has been informed about the risks and has the qualifications necessary for this work.
Then complete the RMA form (Return Merchandise Authorization), sign it and send it to our “Returns Centre”. E-Mail: services@bartec.com Fax: +49 7931 597-119 We cannot guarantee the processing within the contractually agreed period for any returns received by us without RMA number.
Disposal Mobile Computer and accessories contains metallic and plastic parts and electronic components. WEEE registration number of the BARTEC GmbH: DE 95940350 TAs professional electrical devices, our devices are intended exclusively for commercial use, so-called B2B devices, in accordance with the WEEE Directive. The WEEE Directive provides the framework for the treatment of old electrical equipment throughout Europe.
MC 92N0 - Mobile Computer Declaration of Conformityl Type 17-A1A*-****/******** Declaration of Conformity 10.1 EU Declaration of Conformity Subject to technical changes. 35/36 January 2022...