Table of Contents
Advertisement
1.4 Safety
The board uses only extremely low voltages.
While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.
Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other boards.
Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid
short circuits due to unwanted contacts with other board components.
If the board has become wet, never connect it to any external power supply unit or battery.
Check carefully that all cables are correctly connected and that they are not damaged.
1.5 Electrostatic Discharges
The board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the devices
and/or components on-board.
Whenever handling this product, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static surface is
also highly recommended.
1.6 RoHS compliance
The board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.
CCOMe-C79
CCOMe-C79 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by E.S. Copyright © 2021 SECO S.p.A.
8
Advertisement
Table of Contents
