Pre-Ride Checks - CCM Spitfire 2020 Series Owner's Manual

Pre-ride checks

The following items should be checked before
every ride to ensure the motorcycle will function
correctly:
Service Information
See section for more in depth
instruction.
Chain & Sprocket:
• Check chain tension.
• Check chain condition.
•
Check sprocket condition.
Brakes:
• Check front and rear brake fluid
levels. Top up if low.
• Check front and rear brake pads for
signs of wear or damage. Replace if
necessary.
• Check for a spongy feel on front or
rear brake lever/pedal. Bleed brake
system if necessary.
Tyres:
•
Visually inspect tyres for splits or
damage. Replace if necessary.
• Check tyre tread level is sufficient for
the type of riding about to be done.
• Check tyre pressures are in line with
the recommended pressures.
13
Wheels:
• Inspect front and rear wheel rims for
splits, cracks or dints. Replace if
necessary.
• Check front and rear wheel spokes are
tensioned correctly.
• Check rear wheel alignment is set
correctly. Adjust if necessary.
Clutch:
• Check clutch lever smooth operation
and free play. Adjust if necessary.
• Check the clutch hose for damage or
fraying. Replace if necessary.
Throttle:
• Check the throttle cable for smooth
operation and free play. Adjust if
necessary.
• Check the throttle cable for signs of
damage or fraying. Replace if
necessary.
Fuel:
• Ensure fuel level in tank is sufficient.
• Check for fuel leaks.
Engine oil:
• Ensure oil level in engine is correct.
Top up if low. See
Information
for required oil type. See
Service Information
for more details.
•
Check vehicle for oil leaks. If signs of
leaking fluid are seen do not ride the
motorcycle and seek professional
advice from the CCM Services team.
Service Information
See
details.
Coolant:
• Check coolant level in radiator.
Coolant should be visible through filler
neck on top of radiator elements. Top
up if lower than elements.
• Check vehicle for signs of coolant
leaks. If signs of leaking fluid are seen
do not ride the motorcycle and seek
professional advice from the CCM
Services Team.
Bodywork fixings:
• Check security of all bodywork fixings
and fasteners.
Technical
for more