CCM Spitfire 2020 Series Owner's Manual page 20

• Coolant
Risk of burns from escaping coolant!
The hot cooling system is pressurised.
Allow the coolant to cool down before
opening the radiator cap.
Make sure the ground is flat and level, hold the
motorcycle vertical.
Once the radiator has cooled, remove the cap (1)
by turning it counter-clockwise.
40mm
19
Ensure correct coolant level is maintained.
Coolant minimum level is defined by the internal
top plate. Maximum level is 40mm below top cap)
• Clutch
Checking operation of clutch
Pull in the clutch lever.
-
The pressure point must be clearly
-
perceptible.
If it is not, have the clutch checked by
-
an approved CCM workshop.
1
Checking clutch lever play
Pull in clutch lever until resistance is felt.
Recommended clutch lever play (a) is 3-5mm
The lever position can be adjusted to suit hand
size. To adjust the lever distance, rotate the
adjuster (B) COUNTER-CLOCKWISE. To increase
the lever distance, rotate the adjuster (B)
CLOCKWISE.
• Wheels and tyres
Checking tyre tread depth
Your motorcycle's handling and grip can be
impaired even before the tyres wear to the
minimum tyre tread depth permitted by law.
Have the tyres changed in good time before they
wear to the minimum permissible tread depth.
Make sure the ground is level and firm and place
the motorcycle on its stand.