Always store your motorcycle in a cool, dry place and if necessary, protect it against dust with a porous cover. Always ensure the motorcycle is dry and the engine has fully
cooled before covering.
Long term
Before storing your motorcycle for an extended period of time:
•
Thoroughly clean the motorcycle.
•
Lubricate the brake and clutch lever pivots along with the side and main stand pivots.
•
Lubricate any control cables.
•
Coat any bright metal parts in acid-free grease (e.g. Vaseline or ACF50).
•
Drain the motorcycle fuel tanks.
•
Remove the battery or connect it to the lithium battery optimizer.
•
Cover muffler outlet with a plastic bag to stop moisture entering.
•
Stand the motorcycle in a room in such a way that there is no weight on either the front or rear wheel to prevent tyre damage during storage (use a box type
stand).
Returning the motorcycle to service
Before attempting to ride the motorcycle after a long period of storage:
•
Remove any protective grease applied.
•
Thoroughly clean the motorcycle.
•
Remove any exhaust muffler covers.
•
Check condition of battery and install a charged battery if necessary.
•
Work through the pre-operational checklist before attempting to start or ride the motorcycle.