Maintenance; Running In; Daily Checks - CCM Spitfire 2020 Series Owner's Manual

Maintenance

Running In

To ensure the best performance and reliability of your motorcycle, it is important that the following running in procedure is followed. Failure to comply may result in
warranty invalidation.
At all times;
• Do not use high engine speed when engine is cold.
• Avoid labouring the engine. Downshift before engine "struggles".
• Do not use higher engine speed than required. Using a lower gear increases fuel economy and reduces environmental and noise pollution.
<500 MILES
• Do not use full throttle
• Vary the throttle opening and engine-speed range frequently.
• Avoid maintaining constant engine speeds for prolonged periods of time
• Avoid high engine speeds
• Do not exceed 75mph.
• Avoid aggressive acceleration and deceleration manoeuvres, except in an emergency
• Maximum speeds during running-in Period ≤75 mph
500 – 1000 MILES
• Ensure first service (as per Service Record) is carried out.
• Maximum engine speed can be gradually increased to the rev limit for short periods.

Daily Checks

See "Pre-Ride Checks" section
16