Ignition Lock - CCM Spitfire 2020 Series Owner's Manual

Changing of settings
WARNING!
Changing of any settings other than time
is strictly prohibited. Changes to these
settings is logged in the instruments and
will invalidate your CCM warranty. It is
important that the factory settings are
used. Contact CCM if you require factory
settings to be re-installed.
To change the time, press and hold the MODE and
RESET button at the same time for 2 seconds.
Press the RESET button to increment the selected
setting and press the MODE button to toggle
between selected settings. Once complete, press
and hold MODE and RESET button for 2 seconds to
revert to normal display mode.

Ignition Lock

WARNING!
Never activate the ignition lock whilst
the vehicle is moving as the electrical
systems will be switched off, which may
result in loss of control or an accident.
Additionally, refrain from storing the key
fob in a location which will be in close
contact with the receiver.
Risk of battery running low if ignition left
on for long periods.
Ignition is toggled on and off by holding the
wireless key fob against the receiver area
indicated below;
When ignition is turned to the "on" position,
instrument display and sidelights will illuminate,
and electrical functions such as horn, indicators
and brake light will become functional.
To start engine, ensure ignition is in the "on"
condition with the dashboard illuminated and
press "FIRE" button (1).
To turn engine off, press the "KILL" button (2).
1
2
6