Table of Contents
Advertisement
Pre-ride checks
The following items should be checked before every ride to ensure the motorcycle
will function correctly:
:
Chain & Sprockets
Check chain tension.
Check chain condition.
Check sprocket condition.
Brakes:
Check front and rear brake fluid levels. Top up if low.
Check front and rear brake pads for signs of wear or damage.
Replace if necessary.
Check for a spongy feel on front or rear brake lever/pedal. Bleed
brake system if necessary.
Tyres:
Visually inspect tyres for splits or damage. Replace if necessary.
Check tyre tread level is sufficient for the type of riding about to be
done.
Check tyre pressures are in line with the recommended pressures.
Wheels:
Inspect front and rear wheel rims for splits, cracks or dints. Replace
if necessary.
Check front and rear wheel spokes are tensioned correctly.
Check rear wheel alignment is set correctly. Adjust if necessary.
Clutch:
Check clutch lever smooth operation and free play. Adjust if
necessary.
21
Check the clutch hose for damage. Replace if necessary.
Throttle:
Check the throttle cable for smooth operation and free play. Adjust
if necessary.
Check the throttle cable for signs of damage or fraying. Replace if
necessary.
Fuel:
Ensure fuel level in tank is sufficient.
Check for fuel leaks.
Engine oil:
Ensure oil level in engine is correct. Top up if low. See Technical
Information for required oil type. See Service Information for more
details.
Check vehicle for oil leaks. If signs of leaking fluid are seen do not
ride the motorcycle and seek professional advice from the CCM
Services team. See Service Information for more details.
Coolant:
Risk of burns from escaping coolant!
The hot cooling system is pressurised.
Allow the coolant to cool down before opening the
radiator cap.
Check coolant level in radiator. Coolant should be visible through
filler neck on top of radiator elements. Top up if lower than elements.
Advertisement
Table of Contents
