Numatic Hi&Lo NHL15 Original Instructions Manual page 24

After the removal of all the packaging, carefully open and check the contents.
1
Fit the handle to the machine using the fixings supplied.
(Fig 1)
3
Fill the water tank, cleaning solution up to the full level
mark, avoid pouring fluids into the central tube as this leads
directly to the vacuum motor (Fig 3).
5
Assemble the wands, floor-tool, hose and secure to the
machine (Fig 5)
7
9
The switches on the front of the machine, control the
vacuum and pump operations. (Fig 7)
9. Hi Lo Pump Switch
10. Vacuum Switch
11. Pump Switch
Quick Set Up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION
Fig 1
Fig 3
Fig 5
10
11
Fig 7
2
Remove the dome, unclip and remove the waste water tank
(Fig 2)
4
Replace the waste water tank, lock in place using the red
locking clamp and replace the dome. (Fig 4)
6
Fig 6
Connect the solution tube (Fig 6)
8
Fig 8
Operate the trigger (Fig 8) to apply water and vacuum the
carpet (Fig 9).
Fig 2
Fig 4
Fig 9