Technical Data; Engine; Mower; Sound Power Level - Sabo 53-PRO M VARIO Operator's Manual

Grass accumulation
under the mower blade.
Insufficient overlap
between mowing lanes.
Grass is damp.
In case of faults and defects which have not been listed here, please contact the
nearest authorized dealer.
Repairs which require specialized knowledge should only be performed by a qualified
expert. Your authorized dealer will naturally also be glad to help if you do not wish to
perform the maintenance work described here yourself.

19 TECHNICAL DATA

Engine

SA322020
Engine
Engine displacement
Engine speed
Rated input
Electrode gap
Fuel
Tank contents
Lubricating oil
Oil quantity
SA322120
Motor
Capacity
Rotation speed
Power of Device
Electrode gap
Fuel
Tank capacity
Lubricating oil
Oil quantity
All models

Mower

Housing
Cutting width
Cutting heights
Handlebar height adjustable
Driving speed
Weight
Length
Width
Height
Wheels front / rear
Mount front
Set higher cutting height I .
If grass is long, the mowing
lanes may need to overlap
further.
Set higher cutting height I .
Allow the lawn to dry.
Yamaha 4-stroke engine, MA190V
190 cm
2800 rpm
3.2 kW
0.6 - 0.7 mm
Standard unleaded fuel,
with max. 10% ethanol or max. 5% MTBE,
do not use alkylate-based petrol!
approx. 1.2 litres
SAE 10W30, SAE 10W40
4-stroke engine oil API service class SE
or a higher class oil
0.6 litres
B&S 4-stroke motor, 850 I/C
190 cm
2800 min
3.2 kW
0.5 mm
Unleaded standard petrol, with
max.10% ethanol
approx. 1.3 litres
SAE 30, SAE 10W30, SAE 5W30
or similar brand name oil,
minimum quality SF
0.5 - 0.6 litres
Steel
530 mm
per axle, 7x
30, 40, 50, 62, 74, 85, 95 mm
3 heights
2.0 – 3.5 km/h
51.5 kg (SA322020)
48.5 kg (SA322120)
1650 mm
575 mm
485 mm
Ø 210 mm / Ø 210 mm
Grooved ball bearing
Mount rear

Sound power level

Guaranteed sound power level;
measured according to 2000/14/EC
Vibrations
Vibrations on the lawnmower's handlebar;
measured according to EN ISO 5395-2
Measuring inaccuracy; according EN 12096
Sound pressure level
SA322020
Emission sound pressure level at operator's workplace;
measured according to EN ISO 5395-2
Measuring inaccuracy; according to ISO 4871
SA322120
Emission sound pressure level at operator's workplace;
measured according to EN ISO 5395-2
3
Measuring inaccuracy; according to ISO 4871
20 ORIGINAL SPARE PARTS
SA322020
Roller bearing grease
Spark plug
Air filter insert
Pre-filter
Cutter bar
SA322120
3
Roller bearing grease
-1
Spark plug
Air filter insert
Pre-filter
Cutter bar
12
Bronze plain bearing
L = 96 dB(A)
wa
a = 2.5 m/s
hW
1.3 m/s
L = 83 dB(A)
pA
1.5 dB
L = 80 dB(A)
pA
1.5 dB
SAA11300
SAU15939
SAU15985
SAU15986
For safety reasons, the cutter bar must
always be replaced by an authorised
workshop.
This workshop has the respective spare
part numbers for the cutter bar available.
SAA11300
M78543
MIU12718
MIU12719
For safety reasons, the cutter bar must
always be replaced by an authorised
workshop.
This workshop has the respective spare
part numbers for the cutter bar available.
2
2