Vidref - Barco ImagePRO-II User Manual Addendum

--ch (channel)
--units (units)
--percent
--pixel
--save (save view settings)
--recall (recall view settings)
--reset (reset view settings)
Query Format 1 (Unit): VIEW --con (connector) --ch (channel) --?
Query Response 1: View Settings in the following format
VIEW --unit (units)
Query Format 2 (percent values): VIEW --con (connector) --ch (channel) --percent --
?
Query Response 1: View Settings in the following format
VIEW --hpos (h pos) --vpos (v pos) --hsize (h size) --vsize (v size)
Query Format 3 (pixel values): VIEW --con (connector) --ch (channel) --pixel --?
Query Response 1: View Settings in the following format
VIEW --hpos (h pos) --vpos (v pos) --hsize (h size) --vsize (v size)
Connectors:
0=DVI
1=D15
2=HDMI
3=DP
4=SDI1
5=SDI2 (available when Dual option mezzanine installed)

VIDREF

Description: Video Sync Reference Settings
Command Format:
--hoffset2 (h offsetB) --voffset2 (v offsetB)
--src (source A) --srcb (source B)
Parameters: --hoffset1 (Chan A h offset) : (-HTotal/2)...(HTotal/2)
--voffset1 (Chan A v offset) : (-VTotal/2)...(VTotal/2)
--hoffset2 (Chan B h offset) : (-HTotal/2)...(HTotal/2)
--voffset2 (Chan B v offset) : (-VTotal/2)...(VTotal/2)
--src (Chan A lock source)
--srcb (Chan B lock source)
Query Format: VIDREF [--qall|--qsettings|--qstatus]
Query Response:
26-0904001-00 Rev 00.00
:0-1, input channel
:0 = percent, 1 = pixel
:if values are given in percent, See PANZOOM --help for
parameter details
:if values are given in pixel, See RECT --help for parameter
details
VIDREF --hoffset1 (h offsetA) --voffset1 (v offsetA)
4-HDMI, 5-DP, 6-SDI1, 7-SDI2
Video Reference settings in XML format
: 0-freerun, 1-ext sync, 2-DVI, 3-HD15
: 0-freerun, 1-Channel A
19