Ipv6 - Htek UC924E User Manual

Basic Setting Configuration
1. Click NetworkBasicIPv4 setting
2. Select the desired Type: DHCP, Static or PPPoE
3. Fill the necessary information.
4. Click and restart the phone.

IPv6

If you set IP Mode to IPv6, IP phone will use IPv6 address. IPv6 has two network modes:
DHCP, Static
To configure IPv6 via Phone interface :
1. Press MenuSettingsAdvanced Setting (password: admin) NetworkWAN Port
IP Port Mode.
2. Press or to change the IP Port Mode..
3. Press or Save soft key to save the configuration.
57