jbc DDE Instruction Manual page 4

Connecting to FAE
DDE can be connected to FAE1 and FAE2 fume extractors. To do so, the DDE control unit must be
updated with program version 8886784 (or later versions), which can be downloaded form JBC's
website at https://www.jbctools.com/software.html.
Once the station is updated, connect it to the fume extractor with the RJ12 cable, provided with FAE1
and FAE2. Use the "FAE/Robot" connector on the control unit and any "Station" connector on the
fume extractors.
The setting of the fume extractor must be done from the FAE's own interface.
FAE1 Connectors
4
FAE2 Connectors
DDE
2-Tool Control Unit
RJ12 Cable
Ref. 0019751
Supplied with FAE1/FAE2
either