Hold Function - Parkside PNM 2 A1 Operating Instructions Manual

Press the ON/OFF/REF button 5 to exit the relative angle
♦
measurement mode.

Hold function

It may sometimes happen that you cannot see the LCD display 1 while
taking a measurement.
Press the HOLD button 2 to store the measured result. You can
♦
now move the device and read the value.
display 1.
Press the HOLD button 2 to deactivate the hold function.
♦
│ GB │ IE
■ 20
is shown on the LCD
PNM 2 A1