Switching The Device On/Off; Selecting The Mode - Parkside PNM 2 A1 Operating Instructions Manual

Switching the device on/off
Press the ON/OFF/REF button 5 to switch the device on.
♦
Hold down the ON/OFF/REF button 5 for two seconds to switch
♦
the device off.

Selecting the mode

Press the MODE button 4 to switch between the modes Degree
♦
(°), Percent (%), mm/m and Inclination (in/ft). The inclination values
are output in steps of 1⁄8 inch/foot. The selected unit is shown in the
LCD display 1.
│ GB │ IE
■ 18
PNM 2 A1