Handling And Operation - Parkside PNM 2 A1 Operating Instructions Manual

Tighten the screws to secure the battery compartment cover 6.
♦

Handling and operation

Notes: (1) If the measured value is more than 90°, the orientation
of the value is automatically reversed.
(2) If the device is inclined more than 30° to the front or rear,
Erro is shown in the LCD display 1. Moving the device too quickly
will also cause Erro to appear on the LCD display 1.
(3) The magnetic base 3 can be used to affix the device to a
surface containing iron. (4) Bring the device into a level orientation
before using it. (5) The device has an automatic shutoff function.
If you do not use the device for longer than three minutes, it will
switch itself off.
PNM 2 A1
GB │ IE │
17 ■