Table of Contents
Advertisement
Using the DVD player
On the front panel:
Press ¢ or 4.
Press 4 to locate the beginning of the current chapter, title, or
track, and press ¢ to locate the beginning of the next chapter, title,
or track.
Note:
• When you play a Video CD or SVCD disc with PBC function or a
DVD disc, the unit may locate different place, but it will generally
locate the beginning of the title or chapter or track.
Resuming playback
The unit stores the position on a disc
where you want to interrupt playback
at, and resumes playback from that position later.
To store the playback position —————————
From primary remote control only:
RESUME
Press RESUME during playback.
The unit stores the position at which RESUME is pressed, and the
RESUME indicator in the display window is lit. The last stored
memory overrides the previous memory.
Note:
• The interrupted position is stored even when
remote control, or
on the center unit, are pressed to switch
power OFF (standby), instead of pressing RESUME.
To resume playback from the stored position
Press RESUME while paused.
Playback begins from the stored position.
• The unit will also resume playback when RESUME is pressed in
the standby mode.
Note:
• When you press RESUME during playback of a Video CD or
SVCD disc with the PBC function, the unit may resume playback
from a point slightly earlier than the resume point you stored.
To clear the stored position
Open the disc tray.
The RESUME indicator in the display window goes off.
24
4, ¢
AUDIO on the
———
Selecting playback from the DVD menu
DVD discs generally have their own menus which show
the disc contents. These menus contain various items
such as titles of a movie, names or songs, or artist
information, and display them on the TV screen.
You can locate a desired scene by using the menu.
7 Insert the DVD disc.
From the remote controls:
Primary remote control
1
2
1.
Press MENU or TITLE.
The menu appears on the TV
screen.
• TITLE not on secondary
remote control.
2.
Use the 2/3/5/∞ cursors to select a desired item,
then press ENTER.
The unit starts playback of the selected item.
• With some discs, you can also select items by entering the
corresponding number using the number buttons, which may
cause the unit to automatically start playback.
About menu
Normally, a DVD disc which contains more than one title may have
a "title" menu which lists the titles. In this case, the menu appears
on the TV screen by pressing TITLE . Some DVD discs may also
have a different menu which appears by pressing MENU.
See the instructions of each DVD disc for its particular menu.
Notes:
• When
appears on the TV screen by pressing TITLE in step 1:
The disc does not have a menu listing the titles.
• When
appears on the TV screen by pressing MENU in step 1:
The disc does not have a menu.
Secondary remote control
2
1
Example:
Advertisement
Table of Contents
