Table of Contents
Advertisement
DVD DIGITAL THEATER SYSTEM
Simplified connection manual
English
LVT0517-006A
FM and AM antenna terminals (6)
XV-THA10
(Center unit)
Analog audio input and output terminals (8, 9)
Ensure that
the £ mark
on the plug
faces upwards.
To connect speakers (7)
Connect the satellite speakers and center
speaker to the terminals on the powered
subwoofer using the speaker cords supplied.
Labels are attached to the speaker cords to
indicate the speaker and terminal to which
each is to be connected.
• The four satellite speakers may be used at
either front or rear.
• Ensure that the left and right speakers are
connected to left and right respectively, and
that they are connected with the correct
polarity (+ve, –ve). The white speaker cord
connects to the + terminal, and the black
speaker cord connects to the – terminal.
Twist and remove
Center speaker
the insulation at the
end of each speaker
cord.
Front right speaker
Speaker cord (6 m)
(19.7 ft)
Black
Rear right
Rear left
speaker
speaker
Speaker cord
(15 m) (49.2 ft)
EN, FR
TH-A10
Please see INSTRUCTIONS from page 6 to page 10 as well.
Please see the reverse page.
Digital input and
S-video output and
output terminals (9)
input terminals (6, 8, 9)
AC power cord (supplied) (10)
COMPU LINK
Before plugging the center unit
terminals (52, 54)
into an AC outlet, make sure that
VIDEO OUT SELECT (7)
all connections have been made.
Video cable (supplied) (6)
Connect the MONITOR OUT
terminal to composit video
Yellow
input terminal on the TV.
Yellow
System cable (supplied) (6)
SP-PWA10 (Powered sub woofer)
Connect the center unit to
powered sub woofer.
Ensure that the £
mark on the plug
faces to the right.
Front left speaker
White
To AC outlet
Before plugging the powered sub woofer
Note:
into an AC outlet, make sure that all
• Mixing up the polarity
connections have been made.
of the speaker cords
can reduce the stereo
effect and sound
quality.
Installation
Example
Powered sub-woofer
S-video cable
(not supplied)
Connect to the TV if
it has an S-video in-
put (for higher image
quality). Connect the
cables with the £
mark facing down.
Satellite speaker
(rear left speaker)
The rear speakers are
placed behind the
listening position.
To hang satellite speakers from the wall
Use the supplied bracket to fix satellite speakers to the wall.
CAUTION: ATTACHING THE BRACKETS ON THE WALL
When attaching the brackets on the wall, have them attached to the wall by a qualified
person.
DO NOT attach the brackets on the wall by yourself to avoid an unexpected damage of
their falling from the wall, caused by incorrect attachment or weakness in the wall.
Location of attachment to wall:
Care is required in selecting a location for attaching satellite speakers to the wall.
Injury to personnel, or damage to equipment, may result if the speakers are attached in a
location which interferes with daily activities.
Attaching speakers to the bracket
1.
Use the screw supplied to attach the
speaker to the bracket.
Bracket
Screw
0900TNMNATJSC
V
J
C
Satellite speaker
Center speaker
(front left stpeker)
TV
Center unit
Satellite speaker
(front right speaker)
CAUTIONS:
• For safety reasons, always ensure
that there is sufficient place behind
the powered sub-woofer.
• If the front and rear speakers are
placed on the floor, always ensure
that they are level.
Satellite speaker
(rear right speaker)
Audio channel display lamp
Uses lamps to display the audio channel configuration for the
disc currently playing.
• The audio channel
display lamp is not
an indicator of
which speakers are
producing sound.
The lamps refer to the speaker channel as follows.
L:
Left front speaker channnel
R:
Right front speaker channel
C:
Center speaker channel
RS: Right surround speaker channel
2.
LS: Left surround speaker channel
Adjusting the angle of the satellite
S:
Rear speaker channel (monaural)
speakers
LFE: Sub woofer channel
The angle of the speaker may be adjusted
in the front-rear and left-right directions
The lamp display indicates the type of disc (DVD or CD)
along the channel in the bracket.
currently playing as follows.
When adjusting the angle, loosen the
Example:
screw slightly, make the adjustment, and
With Dolby Digital 5.1 ch, DTS Digital 5.1 ch, or MPEG
then tighten the screw firmly.
Multichannel 5.1 ch surround
Tilting the speaker to the front
CAUTION:
If the screw is not
With Dolby Digital (Lt/Rt)
tightened firmly, it may
cause injury to personnel
or damage to equipment.
With stereo sound (eg Audio CD)
Tilting left-right
When playing DVD recorded in Dolby Digital, Dolby Pro Logic,
DTS, or MPEG Multichannnel Surround Sound, set the main
system surround mode to "SURROUND ON."
When it is set to "SURROUND OFF" the audio channel display
lamp will not change. However, sound will be played without
surround effects (see page 21).
To attach non-slip rubbers to the center
speaker
Attach the supplied non-slip rubbers at three points on the
bottom of the center speaker.
The non-slip rubbers are
adhesive. Peel off the seal
before applying.
Attach non-slip rubbers at
the three points shown in the
diagram.
Attach two rubbers at left
and right at the front of the
speaker, and one in the
middle at the rear.
Non-slip rubber
1 cm (7/16") 5 cm (2")
Front side
Bottom
Advertisement
Table of Contents
