Manufacturer And Vendor - Toto 0G3861Y Instructions For Construction

Water nozzle installation
Decorative plate and handle part installation(IV)
DP353 and DV311-3 water nozzle
First fix the fixing plate onto the valve body by using fixing screws.Then install the
small fixing screws onto the valve core and screw tight.Then put the decorative plate
on the handle part and install the mounted handle and decorative plate onto the
valve body together(If it is unable to push the handle part in completely once for all
when fixing the handle part and valve body O-ring, please pull the decorative plate
out appropriately.After fixing completely the handle part and O-ring part,then push
the decorative plate to fit with the wall surface.) Finally, fix the mounted handle onto
the valve body by using small screws.
Fixing screw
Decorative plate
Handle part
Small screw
Hex bar wrench
20
Small fixing screw
Fixing plate
Valve body
Attention: a.The positions of differen spare parts.
b.Tighten the small screws.
c.Do not reverse the handle direction.

Manufacturer and vendor

Applicable standard:GB 18145-2014
Product Model No.:See the label on the packaging case
Product name:See the label on the packaging case
Production date:See the label on the packaging case
Assembly factory:TOTO(Dalian)Co.,Ltd.
Telephone:(0411)87624383
Factory address:17 Dong Bei Second Street,Economic&Technical Development
zone,Dalian
TOTO(China)Co.,Ltd.
After-sale service toll free telephone all over the country:
800-820-9787(fixed telephone)
400-820-9787(for mobile phone users)
Vendor:TOTO(China)Co.,Ltd.
Address:Room 1915,North Building of Beijing Jiali Center,No.1,
Guanghua Road,Chaoyang District,Beijing
Website:www.toto.com.cn
21