Toto 0G3861Y Instructions For Construction page 20

Water nozzle installation
3.Body installation
Connect the cold and hot water pipes and use the fixing ring to fix.
4.Water leakage inspection
Provide water in the connecting pipe part buried in wall for water leakage
inspection.
5.Burial
Use mortar to bury.( Attention:It is not necessary to remove the inner side
protective sleeve.Do not allow mortar to enter into the protective sleeve and
screw thread hole).
6.Trim the wall surface For other series,refer to the completion figure and perform
wall trimming according to the right figure.
Completion
wall surface
Inner side
protective sleeve
7.Remove the protective sleeve Loosen
the screws and pull out the outer side
protective sleeve.
(After installation,no outer side protective
sleeve,screws will be mounted)
16
5
5
Installation distance
Outer side
protective sleeve
Dimensional unit:mm
Body
Screw
Protective cover
Water nozzle installation
Decorative plate and handle part installation(1)
DP348 and DV309S water nozzle
As shown in the figure,install the fixing plate onto the valve body.Then use screws
to fix the fixing plate onto the wall.Install the fixing sleeve and decorative cover and
then install the decorative plate onto the valve body. Next,install the O-ring cover of
the switching part and the O-ring cover of the body part onto the valve body. Then
install the handle part into the valve core,install the handle knob onto the switching
core shaft and use small screws to fix.Finally,install the indicating cover onto the
handle.
Attention a.The positions of different parts.
b.Tighten the small screws.
c.Fasten the O-ring cover of the switching part and O-ring cover of the
body part(prevent the decorative plate from loosening).
d.Do not reverse the direction of the handle(the red color represents the
hot water side and the blue color represents the cold water side).
e.When the handle knob fits with the switching core shaft,insert the
handle knob to the deepest location and then tighten the small screws.
Decorative plate
Handle knob
Handle
Parking
Small screw
Indicating cover
Hex wrench
Fixing sleeve
Fixing plate
Screw
Decorative cover Valve body
Receiving hand
17