Osburn 1700-I Owner's Manual page 18

4.1.3 Door Alignment
To align, open the door and loosen the pressures screws located on the lower and upper hinges
of the door using a 3/32" Allen key to free the adjustable hinge rods.
3/32"
Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the
doors. Tighten all door hinge pressure screws when they are at the desired positions.
Configurations 1-2-3-4-5-6, show in which direction these act on the adjustment of the door.
Page 18
A
1
B
3
4
Product Specification Manual - Osburn 1700-I
5
6
2
1
4
3