Table of Contents
Advertisement
Adjust the TABLE RETURN speed control to the
13
suitable travel return speed.
NOTE: The TABLE RETURN pressure must be set high
enough to return the table to the start position and trig-
ger the TABLE START micro-switch.
14
Adjust the clamp pressure regulator to grasp the pro-
file firmly.
NOTE: Both the clamp pads and pressure can be
adjusted so that the profile is not crushed.
UGE058/0803
T
HE
F
EATURES
CONTINUED
CTS Saw
C
ONTROL
4-3
O
PERATION
Advertisement
Table of Contents
