Unpacking The Boxes - Conair CTS 5 User Manual

U
NPACKING THE
B
OXES
3-2
I
NSTALLATION
The CTS Saw comes fully assembled in a single crate.
CAUTION: Lifting
To avoid personal injury or damage to the saw
lift the saw using a forklift or hoist with straps
that have been positioned at the saw's center of
gravity.
1
Carefully uncrate the saw and its components.
Remove all packing material
2
tape, and plastic. Compare contents to the shipping papers
to ensure that you have all the parts.
3
Carefully inspect all components
no damage occurred during shipping. Check all wire ter-
minal connections, bolts, and any other electrical connec-
tions, which may have come loose during shipping.
4
Record serial numbers and specifications
blanks provided on the back of the User Guide's title
page. This information will be helpful if you ever need
service or parts.
You are now ready to begin installation.
5
Complete the preparation steps on page 3-3.
CTS Saw
, protective paper,
to make sure
in the
UGE058/0803