u-blox NORA-W10 Series System Integration Manual page 49

Wi-Fi / Bluetooth external antenna, PN PRO-EX-296
Manufacturer Abracon
Polarization Vertical
Gain +2.0 dBi
Impedance 50 Ω
Size Ø 12.0 x 28.0 mm
Type Monopole
Cable length 100 mm
Connector U.FL. connector
Comment This antenna requires to be mounted on a metal ground plane for
best performance. To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see
connector design. This reference design must be followed to
comply with the NORA-W10 FCC/IC modular approvals.
Approval FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Wi-Fi / Bluetooth / Bluetooth LE external whip antenna, PN PRO-EX-333
Manufacturer Abracon
Polarization Vertical
Gain +3.0 dBi
Impedance 50 Ω
Size Ø 10 x 83 mm
Type Monopole
Connector Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment To be mounted with a U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for
use (PN PRO-EX-332).
Approval FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Wi-Fi / Bluetooth external whip antenna, PN PRO-EX-327
Manufacturer Abracon
Polarization Vertical
Gain +3.0 dBi
Impedance 50 Ω
Size Ø 9.4 x 70.5 mm
Type Monopole
Cable length 100 mm
Connector U.FL. connector
Comment To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see
connector
reference design to comply with the NORA-W10 FCC/IC modular
approvals.
Approval FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA and ICASA
UBX-22005601 - R04
C1-Public
design. Ths reference design must be followed this
Pre-approved antennas list
NORA-W10 series - System integration manual
RF
RF
Page 49 of 56