Dual-Band Antennas - u-blox NORA-W10 Series System Integration Manual

Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-237
Manufacturer Abracon
Gain +3.0 dBi
Impedance 50 Ω
Size 27 x 12 mm (triangular)
Type Patch
Cable length 100 mm
Connector U.FL. connector
Comment Should be attached to a plastic enclosure or part for best
performance.
To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see
connector
comply with the NORA–W1 FCC/IC modular approvals.
Approval FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA, and ICASA
7.2.1

Dual-band antennas

Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-299
Manufacturer Abracon
Gain +3.0 dBi
Impedance 50 Ω
Size 27 x 12 mm (triangular)
Type Patch
Cable length 100 mm
Connector U.FL. connector
Comment Should be attached to a plastic enclosure or part for best
performance. Dual-band (2.4 GHz / 5 GHz) antenna to be mounted
with a U.FL connector. For information on how to integrate the U.FL
connector, see
followed to comply with the NORA–W1 FCC/IC modular approvals.
Approval FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA, and ICASA
Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-432
Manufacturer Abracon
Gain +3.0 dBi
Impedance 50 Ω
Size 24x22x1 mm with mounting hole
Type Patch
Cable length 100 mm
Connector U.FL. connector
Comment Should be attached to a plastic enclosure or part for best
performance. Dual-band (2.4 GHz / 5 GHz) antenna to be mounted
with a U.FL connector. For information on how to integrate the U.FL
connector, see
followed to comply with the NORA-W10 FCC/IC modular approvals.
Approval FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA, and ICASA
UBX-22005601 - R04
C1-Public
design. This reference design must be followed to
RF connector design. This reference design must be
RF connector design. This reference design must be
Pre-approved antennas list
NORA-W10 series - System integration manual
RF
Page 50 of 56