Sewing with 2 different stitch lengths and retrieval via knee switch:
» Go to „PSewing"
» Press „Open Folder"
» Press „P" long
» Press „Program A Dsn"
» Now select the desired program number with the + button
» Confirm with the green tick
» Press „Open Folder" again
» For „INS" enter the desired number of seam sections and confirm with „Open Folder"
» For seam section 1, please enter the stitch length for the feed wheel and roller presser
» Now use the left + - buttons to select the 2nd seam section
» For seam section 2, please enter the stitch length for the feed wheel and roller presser
» Activate thread trimming
» Go to the „Return" button at the top right
» You will be asked to "Save Design?" And confirm with "YES".
» Go to the „Return" button at the top right
» Now activate the knee lever with the button
You can now call up between the different stitch lengths with the knee switch or the button on the
machine head.