Table of Contents
Advertisement
means ABA. And so on. A total of 8 segments can be set. The arrow in the red box can increase or decrease the
number of segments.
3.2 Programmed sewing
As shown in the above figure, in the programmed sewing interface red box indicates the current code of
pattern. Right side blue box at the top of number indicates current pattern total segment. The below number
indicates segment no. of currently displayed on the LCD. Under the programmed sewing finished, it can use in the
red box"+" and "-" keys to select different patterns stored in the system. If the pattern selected has more than one
segment, it can be selected by "+" and "-" in the blue box. Under the sewing interface, you can modify all the data
except adding section, deleting section and circular sewing function. After modification, the parameters will be
available.
It need to note the front two pattern in the programmed sewing, the pattern 1 and pattern 2 are fixed pattern
can't to delete. Each pattern can add 3 segment. Each segment sewing is free sewing mode, after added
multi-segment, it can through sewing machine head key, knee-control switch and LCD panel to shift between
multi-segments. Please activated
switch to shift between segments, otherwise the system will not perform shift action. Multi-segment can setting
different stitches number. The following description is use LCD panel to shift different segment method. Such as
below figure is no.1 pattern has been added as 3 segment.
Figure 12: Programmed sewing interface - Description
key if you need to use sewing machine head keys or knee-control
Advertisement
Table of Contents
