Global LP 2881 Series Instruction Manual & Parts Book page 72

Figure 10: Overlapping sewing interface- Needle position setting
If need to use needle position function in the overlapping sewing, please activated
key shift to needle position setting page, use "+", "-" key modify to require angle value. As require
needle position value can through free sewing needle position angle setting page, by turn over hand-wheel, obverse
current spindle shaft position to confirmation.
Noted: each section of the overlapping sewing can be set separately, including speed, stitches count,
trimming, needle position, and whether trimming or not. Please confirm the pattern of sewing method and
setting is same as your requirement or not before programming, otherwise it will make different sewing
effects.
Figure 11: Overlap seam interface - Number of segments setting
How to use overlapping stitches: Section a represents the forward sewing part, and section B represents the
backward sewing part. The number under the "SEG" character indicates that a total of several sections are sewn.
For example, if SEG is 1, it means only the A segment is sewn, and if it is 2, it means the AB segment is sewn. 3
key. Press scroll