Table of Contents
Advertisement
It not received the panel return data.
3122 Communicate data verification error
The data received was wrong
3123 Spindle shaft drive abnormal
Spindle motor over-current.
3124 Pendulum drive abnormal
Pendulum motor over-current.
3125 Pattern transfer error
Pattern transfer error, communicate problem.
3126 Parameter transfer error
Parameter transfer error, communicate problem.
3127 Knee-control shift sewing failure
The panel no response when shift sewing segment.
3128 Pendulum position abnormal
The pendulum position is out of the normal range.
3129 Over-voltage
Supply voltage is too high.
3130 Under-voltage
Supply voltage is too low.
2 Panel error code
2.1 The control box can't find original point
Spindle shaft or pendulum can't find the original point. At first please check the spindle is running or
not then check the pendulum.
Advertisement
Table of Contents
