Table of Contents
Advertisement
Pre-Installation Tasks
Table 1-3 Minimum Revision of X Modules for DC Power
Model Name
X-CM-00
X-T32-00
X-G32-00
X-M2-00
X-M8-01
X-GT16-00
X16-FM
X8-FM
X4-FM
X-FAN
X-FAN-AC
1. Exception: If an X-CM-00 module meets the Minimum 940 Part Number revision and has a 2
2. Exception: If an X-T32-00 module meets the Minimum 940 Part Number revision and has a 2
3. Exception: If an X-G32-00 module meets the Minimum 940 Part Number revision and has a 2
Prepare Site Wiring for DC Power Installation
1.
Ensure that a branch circuit disconnect device is installed, and that the device is
switched to prevent power from being supplied to the DC power supply.
2.
If desired, attach your wiring to the 2‐hole compression lugs provided.
For your convenience, Enterasys Networks ships with the DC power supply two
2‐hole compression lugs to which you can connect your wiring (6 AWG). These
compression lugs are the correct size to fit over the positive and negative terminal
studs. See Chapter
compression lugs.
1-8 DC Power Supply Installation
digit 940 revision code of 4X (for example, 41, 42, and so on), the module is DC power-
compliant.
digit 940 revision code of 4X (for example, 41, 42, and so on), the module is DC power-
compliant.
digit 940 revision code of 4X (for example, 41, 42, and so on), the module is DC power-
compliant.
2, DC Power Supply Specifications for more details about the
Minimum 940 Part Number
4179
4167
4161
4054
4162
3977
4059
4055
4050
4085
N/A
Minimum 940 Revision
1
5A
2
5A
3
5A
5H
5A
5A
5C
5B
5B
5B
N/A
Advertisement
Table of Contents
Need help?
Do you have a question about the Matrix X Router and is the answer not in the manual?