Enterasys Matrix X Router Installation Manual page 25

New DC Power Matrix X System Installations
If the system is a new Matrix X DC‐powered installation, follow this procedure to verify
DC power compliance of all modules:
1. Obtain the model name and serial number from the front panel of each module to be
installed.
2. Using the model name and serial number, fill out the worksheet in Table
Table 1-2 Worksheet: DC Compliance of Modules for New DC Systems
Model Part No.
Example: X-CM-00
3. Compare the values in the shaded cells of the completed worksheet in Table
minimum values shown in Table
the modules to be installed.
Front Panel Serial Number
Last 4 digits of Date Code
940 Number (year, work
week)
4179 0747
1‐3 on page 1‐8 to determine the DC compliance of
Serial Site 940
Number Code Revision
Counter
5281 63 5A
Matrix X Router DC Power Supply Installation Guide 1-7
Pre-Installation Tasks
1‐2.
DC Compliant?
YES
1‐2 to the